Narrow Selection By

Home > Shop By Size > Kitchen Islands and Carts > By Width > 31 Inches and Over > Baker's Butcher Block Work Table

PRODUCT DETAILS

The perfect mobile prep table for the serious baker, the Baker's Butcher Block Work Table features a 1.75-inch thick Hard Rock Maple top with four-inch coved risers on the back and on both sides. The riser helps maintain sanitary conditions during food preparation. The top is also available with an optional vertical cove that blends in with the horizontal cove - eliminating the 90 corners and allowing for quick and easy clean up. This table is approved by the NSF. Please use the drop-down menu above if you would like to add the optional vertical cove to your order.

The maple top of this rolling work table is treated with a clear Varnique finish that seals and protects the wood, but it is not meant to be cut upon directly. You can also order this work table with an optional penetrating oil finish that is safe for food preparation tasks. Please use the drop-down menu above to select the finish that's right for you.

The stainless steel base of the Baker's Butcher Block Work Table is constructed of type 300 stainless steel with a #3 polish and satin finish. The legs are made of 1.625-inch 16-gauge tubing with gussets to attach to the wood top. All gussets have two locking set screws. The lower shelf is made of 18-gauge stainless steel and is fixed at 12 inches from the floor. A built-in stainless steel bun pan rack conveniently holds eight 18" x 26" pans. Set on sturdy five-inch diameter non-marking casters, this baker's work table is easy to maneuver.

FEATURES

• Solid maple top with Varnique semi-gloss finish
• Stainless steel base
• 1.75-inch thick
• 4-inch coved risers
• Built-in stainless steel bun pan rack
• Non-marking castors
• NSF approved

MANUFACTURER INFO

The high-quality food service products manufactured by John Boos & Company are used by many celebrity chefs and have been featured on The Food Network. A staple in the commercial cooking industry since the early 20th century, John Boos and Company prides itself on the quality, craftsmanship and safety of all its products. Only the finest wood and steel are used in the manufacturing process and all products are made in the USA. A past recipient of the Gold Medal for Excellence in Foodservice Equipment, John Boos and Company is a leading manufacturer of residential and commercial chopping blocks, cutting boards and stainless steel tables. John Boos & Co is firmly committed to managing environmental matters as an integral part of their business practice. Some of the steps they take to accomplish their "green" status include manufacturing wood products that emit far less carbon dioxide, sulfur dioxide, methane and other gases than processing non-wood substitutes; using only formaldehyde free and low emission formaldehyde gluing processes in manufacturing our butcher blocks; and having active recycling programs in place with 95% of all raw materials, scrap, and even their sawdust recycled as fuel to heat their kilns. Boos' sawdust is also recycled as livestock bedding for their local agricultural needs.

PLEASE NOTE...

This is a commercial grade work table. On commercial grade stainless steel work tables, it is common to see residual dye marks where the stainless steel has been bent during production. The dye marks look like light scratches. The dye marks are standard on commercial grade equipment and are not evidence of a defective product. The dimensions of this item allow for 1/8" tolerance.

This item requires assembly.

All John Boos products are covered by a 1-year warranty against defects in material and workmanship.

Copyright 2011 © StainlessSteelStore.com All Rights Reserved.