Narrow Selection By

Home > Shop By Size > Utility Sinks > By Width > Over 26 Inches > Three Bowl Bakery Utility Sink with Drainboard

PRODUCT DETAILS

The Three Bowl Bakery Utility Sink with Drainboard is a commercial-grade sink constructed of durable stainless steel. It features three rectangular sinks (each a generous 20 inches x 28 inches) and two faucet mounts for extra versatility. For added flexibility, this utility sink is available with a drainboard on either the right or left side. Please use the drop-down menu above to choose the side that's best for you.

The Three Bowl Bakery Utility Sink with Drainboard is part of the Pro Bowl Series. All sink bowls are a standard 12-inches deep and are constructed of 16 gauge type 304 stainless steel, fabricated with all welds ground and polished into a one-piece sanitary bowl. Unlike other manufacturer's drawn bowl construction, Pro Bowl sinks guarantee full gauge thickness even in the corners. All corners are coved at a 5/8-inch radius to meet National Sanitation Foundation standards. The sink bottom is formed for drainage and includes a 3-1/2 inch diameter die stamped opening. The sink frame is constructed of 16 gauge type 304 stainless steel and features a 10-inch high backsplash with a two-inch return to wall at a 45-degree angle and down 3/4 inch. The front and sides of the frame have a two-inch edge rolled 180 degrees. All corners are coved at a 5/8-inch radius and welded, ground, and polished into a sanitary single piece. The legs are constructed of 1-5/8 inch diameter pre-galvanized steel tube. The legs attach to the sink with sanitary gussets, each with two set screws to lock the legs in place. Adjustable bracing (1-1/4 inch tubing) on three sides insures no interference with plumbing fixtures, and adjustable bullet feet allow for leveling.

Although the Three Bowl Bakery Utility Sink with Drainboard arrives pre-welded, it requires some simple assembly. You will need to attach the legs, the hardware, and install the drain baskets (included).

FEATURES

• Pro Bowl Series
• Three Rectangular Sinks
• Two Faucet Mounts
• Drainboard
• NSF-Approved

MANUFACTURER INFO

The high-quality food service products manufactured by John Boos & Company are used by many celebrity chefs and have been featured on The Food Network. A staple in the commercial cooking industry since the early 20th century, John Boos and Company prides itself on the quality, craftsmanship and safety of all its products. Only the finest wood and steel are used in the manufacturing process and all products are made in the USA. A past recipient of the Gold Medal for Excellence in Foodservice Equipment, John Boos and Company is a leading manufacturer of residential and commercial chopping blocks, cutting boards and stainless steel tables. John Boos & Co is firmly committed to managing environmental matters as an integral part of their business practice. Some of the steps they take to accomplish their "green" status include manufacturing wood products that emit far less carbon dioxide, sulfur dioxide, methane and other gases than processing non-wood substitutes; using only formaldehyde free and low emission formaldehyde gluing processes in manufacturing our butcher blocks; and having active recycling programs in place with 95% of all raw materials, scrap, and even their sawdust recycled as fuel to heat their kilns. Boos' sawdust is also recycled as livestock bedding for their local agricultural needs.

PLEASE NOTE...

This sink is constructed with a set of standard faucet holes (1-1/8 inch diameter, eight inches apart), but does not include the faucet. You can easily customize your sink by purchasing a separate faucet fixture. The Three Bowl Bakery Utility Sink with Drainboard is a commercial grade sink. On commercial grade stainless steel sinks, it is common to see residual dye marks where the stainless steel has been bent during production. The dye marks look like light scratches. The dye marks are standard on commercial grade equipment and are not evidence of a defective or damaged product. The dimensions of this item allow for 1/8" tolerance.

All John Boos products are covered by a 1-year warranty against defects in material and workmanship.

Copyright 2011 © StainlessSteelStore.com All Rights Reserved.